UMS "Agram" : Freehand Proces za Sons of Horus Spartana < Članci < Hobi

Freehand Proces za Sons of Horus Spartana

Marko Paunović, 20.04.2026.

Naš Miha se ovoga tjedna bavi „Freehand“ tehnikom na Spartanu za Sons of Horus za igru Horus Heresy.

Malo ću objasniti moji proces i dati neke savjete ako ste zainteresirani sami probati ovu tehniku.

Prvi korak je pronaći neki reference, nešto što ćemo koristiti kao inspiraciju i voditelj za boje kasnije. Važno je naglasiti da ne pokušavamo prekopirati crtež 1:1, nego ga koristimo kao početak pa dalje nadodajemo svoje detalje.

Koristio sam crtež od Richard Bagnall-a kao inspiraciju, naravno možete i svoje sketcheve koristiti.

Drugi korak je odrediti prostor i napraviti vodilice. Savjetujem korištenje bijele boje kako ćemo ove vodilice prekriti kasnije. Važno da odredimo površinu s kojom radimo i važne dijelove crteža kroz vodilice.

Nakon toga krećemo od boja u pozadini prema bojama naprijed, u ovom slučaju to su crvene, pa crne, pa zlato. U početku se nemojte previše brinuti da ispadne savršeno, nego samo da označite gdje koje boje idu i da počnete graditi blend od tamnije prema svjetlijoj.

Nakon toga počinje proces dodavanja detalja gdje su potrebni i označavanje rubova zona kako bi stvorili svjetlost. Ovdje sam započeo raditi na licu, koje sam najviše kasnije mijenjao s detaljnijim očima i pokušavao sam više istaknuti nos.

Zadnji korak je jako dugačak i zahtjeva dosta truda. To je popravljanje i dodavanje još detalje gdje je potrebno, kada bojate nešto detaljno na ovako malom prostoru dogodit će se greške, jednostavno pustite da se malo osuši i popravite. U slici možete vidjeti kako mi je crvena prešla na lice, to sam kasnije popravio. Također sam dodao još detalja koristeći svjetlije nijanse boja na određenim dijelovima.

Ovo je bio finalni rezultat, još sam pokušao nadodati neke stvari, ali svaki put kad bi nešto mijenjao namjerno, nešto bi se promijenilo slučajno. Važno je znati kada treba prihvatiti da je freehand gotov. Prvi vam neće biti savršen, ali kroz vježbu ćete postati sve bolji i bolji.

Jedan savjet koji ću vam dati je da uvijek imate neki objekt u fotografiji koji može služiti da se gledatelju prikaže veličina vašeg crteža. Većina kojoj sam pokazao finalu sliku su mislili da je to dosta veći crtež. Ja volim koristiti kovanice.

Sada, da prikažem koliko je lagano krenuti s freehandom i što se može postići kroz vježbu, ću vam dati dvije slike, jedna su kistovi i boje koje sam koristio za ovaj projekt, a druga su neki drugi moji freehandovi. Siguran sam da ćete primjetiti napredak s vremenom.

Hvala vam na čitanju, nadam se da sam vas potaknuo da probate freehand tehniku na svojim modelima.

Najnoviji članci

Freehand Proces za Sons of Horus Spartana

array(2) { ["Article"]=> array(10) { ["id"]=> string(3) "501" ["member_id"]=> string(2) "35" ["title_eng"]=> string(35) "Freehand for Sons of Horus Spartana" ["title_hrv"]=> string(41) "Freehand Proces za Sons of Horus Spartana" ["mask_eng"]=> string(35) "freehand_for_sons_of_horus_spartana" ["mask_hrv"]=> string(41) "freehand_proces_za_sons_of_horus_spartana" ["content_eng"]=> string(6110) "

This week, our Miha is working on the "Freehand" technique on Spartan for Sons of Horus for the game Horus Heresy.

I'll explain my process a bit and give some tips if you're interested in trying this technique yourself.

The first step is to find some references, something that we will use as inspiration and a guide for the colors later. It is important to emphasize that we are not trying to copy the drawing 1:1, but rather use it as a starting point and then add our own details.

I used a drawing by Richard Bagnall as inspiration, of course you can use your own sketches.

The second step is to define the space and create guides. I recommend using white paint as we will cover these guidelines later. It is important to define the surface we are working with and the important parts of the drawing through the guidelines.

Then we move from the background colors to the foreground colors, in this case reds, then blacks, then golds. Don't worry too much about making it perfect at first, just mark where each color goes and start building a blend from darker to lighter.

After that, the process of adding details where needed and marking the edges of zones to create light begins. Here I started working on the face, which I later changed the most with more detailed eyes and I tried to make the nose stand out more.

The last step is very long and requires a lot of effort. It's about fixing and adding more details where needed, when painting something detailed in such a small area mistakes will happen, just let it dry a bit and fix it. In the picture you can see how the red has transferred to my face, I fixed that later. I also added more details by using lighter shades of paint in certain areas.

This was the final result, I still tried to add some things, but every time I changed something intentionally, something would change by accident. It's important to know when to accept that a freehand is finished. Your first one won't be perfect, but through practice you will get better and better.

One tip I will give you is to always have an object in your photo that can serve to show the viewer the size of your drawing. Most people I have shown the final image to thought it was a much larger drawing. I like to use coins.

Now, to show you how easy it is to start freehand and what can be achieved through practice, I'll give you two pictures, one of the brushes and paints I used for this project, and the other of some of my other freehands. I'm sure you'll notice the progress over time.

Thank you for reading, I hope I have encouraged you to try the freehand technique on your models.

" ["content_hrv"]=> string(6228) "

Naš Miha se ovoga tjedna bavi „Freehand“ tehnikom na Spartanu za Sons of Horus za igru Horus Heresy.

Malo ću objasniti moji proces i dati neke savjete ako ste zainteresirani sami probati ovu tehniku.

Koristio sam crtež od Richard Bagnall-a kao inspiraciju, naravno možete i svoje sketcheve koristiti.

Hvala vam na čitanju, nadam se da sam vas potaknuo da probate freehand tehniku na svojim modelima.

" ["created"]=> string(19) "2026-04-20 07:42:58" ["modified"]=> string(19) "2026-04-20 07:42:58" } ["Member"]=> array(10) { ["id"]=> string(2) "35" ["group_id"]=> string(1) "1" ["first_name"]=> string(5) "Marko" ["last_name"]=> string(9) "Paunović" ["first_name_mask"]=> string(5) "marko" ["last_name_mask"]=> string(8) "paunovic" ["username"]=> string(5) "marko" ["password"]=> string(40) "3bd37b326d19d1880d3b93a4b32e8fb3a90fa122" ["born"]=> string(19) "2033-03-07 20:35:00" ["created"]=> string(19) "2009-06-02 20:37:03" } }

Marko Paunović, 20.04.2026.

Radionica bojanja minijatura u Bjelovaru

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "500"
    ["member_id"]=>
    string(2) "95"
    ["title_eng"]=>
    string(39) "Miniature Painting Workshop in Bjelovar"
    ["title_hrv"]=>
    string(40) "Radionica bojanja minijatura u Bjelovaru"
    ["mask_eng"]=>
    string(39) "miniature_painting_workshop_in_bjelovar"
    ["mask_hrv"]=>
    string(40) "radionica_bojanja_minijatura_u_bjelovaru"
    ["content_eng"]=>
    string(6765) "
	

	At the end of March and beginning of April, we held our first miniature painting workshop in Bjelovar. We held them in cooperation with the "Petar Preradović" National Library from Bjelovar, to which we would like to once again thank for the opportunity to demonstrate our hobby to young people in this city.

	

	The first, introductory workshop was led by our Dalibor Čavić, the original creator of this series of workshops. He showed the attendees some of his work and explained the theory behind basic miniature painting in an interesting one-hour lecture.

	

	

	

	

	Due to Dalibor's illness, our Dean Vuković stepped in to lead the second workshop. The second session was reserved for the practical application of the acquired knowledge.

	

	

	

	Eight participants had the opportunity to paint miniatures provided by the Association, but some decided to paint their own miniatures, which Dean naturally made possible.

	

	

	

	

	

	

	

	

	

	See you soon again in Bjelovar!
"
    ["content_hrv"]=>
    string(6737) "
	

	Krajem ožujka i početkom travnja održali smo prve radionice bojanja minijatura u Bjelovaru. Održali smo ih u suradnji sa Narodnom knjižnicom "Petar Preradović" iz Bjelovara kojoj se ovim putem još jednom zahvaljujemo na prilici da demonstriramo naš hobi mladima u ovom nama bliskom gradu.

	

	Prvu, uvodnu radionicu je vodio naš Dalibor Čavić, idejni začetnik ovog serijala radionica. Prisutnima je pokazao neke od svojih radova i objasnio teoriju iza osnovnog bojanja minijatura u zanimljivom jednosatnom predavanju.

	

	

	

	

	Za vođenje druge radionice, uskočio je naš Dean Vuković zbog bolesti Dalibora. Drugi termin bio je rezerviran za praktičnu primjenu stečenih znanja.

	

	

	

	Osam polaznika imalo je priliku bojati minijature koje je Udruga osigurala, ali neki su odlučili bojati i vlastite minijature što im je voditelj naravno omogućio.

	

	

	

	

	

	

	

	

	

	Vidimo se uskoro opet u Bjelovaru!
"
    ["created"]=>
    string(19) "2026-04-14 08:05:13"
    ["modified"]=>
    string(19) "2026-04-14 08:05:13"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "95"
    ["group_id"]=>
    string(1) "2"
    ["first_name"]=>
    string(7) "Dalibor"
    ["last_name"]=>
    string(7) "Čavić"
    ["first_name_mask"]=>
    string(7) "dalibor"
    ["last_name_mask"]=>
    string(5) "cavic"
    ["username"]=>
    string(6) "Tvrtko"
    ["password"]=>
    string(0) ""
    ["born"]=>
    string(19) "2019-04-04 18:51:00"
    ["created"]=>
    string(19) "2019-04-04 18:51:50"
  }
}

Dalibor Čavić, 14.04.2026.

Hobby trgovine u Japanu

array(2) { ["Article"]=> array(10) { ["id"]=> string(3) "499" ["member_id"]=> string(2) "35" ["title_eng"]=> string(21) "Hobby Stores in Japan" ["title_hrv"]=> string(23) "Hobby trgovine u Japanu" ["mask_eng"]=> string(21) "hobby_stores_in_japan" ["mask_hrv"]=> string(23) "hobby_trgovine_u_japanu" ["content_eng"]=> string(8238) "

Last year our Ili went to Japan and was kind enough to write a short story about the hobby stores she visited while there.

I was 3 weeks in Japan and being a geeky (and admittedly an Otaku), of course I spent most of my time there at the famous Akihabara.

Akihabara Electric Town or simply Akihabara is a district in central Tokyo that is famous for its many electronics shops and has also gained recognition as the center of Japan's otaku culture. You can find everything ranging from practical electronics models or parts to gaming and anime merchandise and of course model kits and miniatures.

What my partner and I didn’t expect is that all stores here are at least 5 floors and the most I know have even 10 floors! Above is probably the most famous building in Akihabara, the Akihabara Radio Kaikan. The building is 46.5 m high, is ten levels from the ground floor and has two basement levels. The current building primarily hosts stores selling otaku goods.

While above photos are inside Akihabara Radio Kaikan, but these are how most buildings/stores in Akhabara look like.

Since we are about building and painting miniature models, the place you MUST visit is VOLKS AKIHABARA HOBBY PARADISE 2 (Hobby Paradise 2) - it is a dream destination for every hobbyist. This massive seven-floor store is filled with everything from character goods and figures to model kits, tools, paints, and more.

On the topic of Volks, it began as a small hobby shop in 1972. In the late 1990s they produced the first Dollfie dolls, and in 1999 the first Super Dollfie doll was created by Akihiro Enku. In November 2005, Volks USA opened their first American Tenshi no Sumika store in Los Angeles, California.

We are going to talk a bit about Dollfie. Dollfie dolls were customization tools such as pre-rooted hair and stick-on eye decals. Later, complete dolls were released. There are various body types, male and female, with several forms and skin tones for both as well as a line of child-sized dolls. The company also produces tools and materials to customize and maintain dolls.

Basically they are almost like customising and painting miniature but on a bigger scale. This is a hobby I have had since 2005 (but only become very active in 2017).

Volks store in Osaka - Volks Osaka Showroom.

One place you need to visit if you're into retro gaming is SUPER POTATO! They have 6 stores total, one is in Akihabara, Tokyo and the one in Nipponbashi, Osaka is a lot bigger and has more things to offer. All the photos I shared above are from the Osaka branch. Super Potato had been referred by many as "a museum as much as a shop" based on how visitors serendipitously interact with the games on display.

And a cliche as they say, you always leave Japan with more luggage (or bags). We came to Japan with just one piece of luggage and 2 backpacks on us.

" ["content_hrv"]=> string(8311) "

Prošle godine naša Ili je bila u Japanu i bila je toliko ljubazna da je napisala kratku priču o hobby trgovinama koje je posjetila dok je bila tamo.

Bila sam 3 tjedna u Japanu i, budući da sam geeky (i priznajem otaku), naravno da sam većinu vremena provela tamo u poznatoj Akihabari.

Akihabara Electric Town ili jednostavno Akihabara je četvrt u središnjem Tokiju poznata po brojnim trgovinama elektronikom, a stekla je i priznanje kao središte japanske otaku kulture. Možete pronaći sve, od praktičnih modela ili dijelova elektronike do igraće i anime robe, pa sve do kompleta modela i minijatura.

Ono što moj partner i ja nismo očekivali jest da sve trgovine ovdje imaju barem 5 katova, a većina koje poznajem ima čak 10 katova! Iznad je vjerojatno najpoznatija zgrada u Akihabari, Akihabara Radio Kaikan. Zgrada je visoka 46,5 m, nalazi se na deset katova od prizemlja i ima dva podrumska kata. U sadašnjoj zgradi se uglavnom nalaze trgovine koje prodaju otaku robu.

Iako su gornje fotografije unutar Akihabara Radio Kaikana, ovako izgleda većina zgrada/trgovina u Akhabari.

Budući da se bavimo izradom i bojanjem minijaturnih modela, mjesto koje MORATE posjetiti je VOLKS AKIHABARA HOBBY PARADISE 2 (Hobby Paradise 2) - to je destinacija iz snova za svakog hobista. Ova ogromna trgovina na sedam katova puna je svega, od robe s likovima i figurama do maketa, alata, boja i još mnogo toga.

Što se tiče Volksa, započeo je kao mala hobi trgovina 1972. Krajem 1990-ih proizveli su prve Dollfie lutke, a 1999. Akihiro Enku stvorio je prvu Super Dollfie lutku. U studenom 2005. Volks USA otvorio je svoju prvu američku trgovinu Tenshi no Sumika u Los Angelesu u Kaliforniji.

Pisat ću malo o Dollfieju. Dollfie lutke bile su alati za prilagodbu poput unaprijed ukorijenjene kose i naljepnica za oči koje se samoljepe. Kasnije su izdane i gotove lutke. Postoje različiti tipovi tijela, muški i ženski, s nekoliko oblika i tonova kože za oboje, kao i linija lutaka dječje veličine. Tvrtka također proizvodi alate i materijale za prilagodbu i održavanje lutaka.

U osnovi su gotovo kao prilagodba i bojanje minijatura, ali u većoj skali. Ovo je hobi koji prakticiram od 2005. (ali sam postala vrlo aktivna tek 2017.).

Volks trgovina u Osaki - Volks Osaka Showroom.

Jedno mjesto koje morate posjetiti ako volite retro igre je SUPER POTATO! Imaju ukupno 6 trgovina, jedna je u Akihabari u Tokiju, a ona u Nipponbashiju u Osaki je puno veća i ima više toga za ponuditi. Sve fotografije koje sam podijelila gore su iz podružnice u Osaki. Super Potato su mnogi nazivali "muzejem koliko i trgovinom" na temelju načina na koji posjetitelji slučajno komuniciraju s izloženim igrama.

I klišej kako kažu, uvijek napuštaš Japan s više prtljage (ili torbi). Mi smo u Japan došli samo s jednim komadom prtljage i dva ruksaka.

" ["created"]=> string(19) "2026-04-08 08:51:21" ["modified"]=> string(19) "2026-04-08 08:51:21" } ["Member"]=> array(10) { ["id"]=> string(2) "35" ["group_id"]=> string(1) "1" ["first_name"]=> string(5) "Marko" ["last_name"]=> string(9) "Paunović" ["first_name_mask"]=> string(5) "marko" ["last_name_mask"]=> string(8) "paunovic" ["username"]=> string(5) "marko" ["password"]=> string(40) "3bd37b326d19d1880d3b93a4b32e8fb3a90fa122" ["born"]=> string(19) "2033-03-07 20:35:00" ["created"]=> string(19) "2009-06-02 20:37:03" } }

Marko Paunović, 08.04.2026.

Tabla Red Temple of Light za Necropolis28 Kampanju

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "498"
    ["member_id"]=>
    string(3) "100"
    ["title_eng"]=>
    string(53) "Red Temple of Light - Board for Necropolis28 campaign"
    ["title_hrv"]=>
    string(51) "Tabla Red Temple of Light za Necropolis28 Kampanju "
    ["mask_eng"]=>
    string(53) "red_temple_of_light_-_board_for_necropolis28_campaign"
    ["mask_hrv"]=>
    string(50) "tabla_red_temple_of_light_za_necropolis28_kampanju"
    ["content_eng"]=>
    string(7425) "
	This year, Agram Arena – an international tabletop strategy game competition – was back on the schedule. The team decided to organize a two-day campaign for Necropolis 28. It is an interesting game that has a very good hobby aspect, as it also involves making a gaming board. So I decided to join in and make one. This article follows my work on the board whose working title was Red Temple of Light…

	

	I imagined the terrain as a temple made of brick towers, connected by bridges. Aesthetically, I wanted it to look like it was in the process of being demolished or built.

	

	

	

	I made the towers from cardboard rolls for holding blueprints from local newspapers and for rolls of foil.

	

	

	

	

	The decision to texture the bricks fell on cutting individual bricks from XPS, since that way I could get the most realistic joints between the towers and bridges.

	

	

	

	

	Since it seemed too tall for practical use in the game, I decided to magnetize the towers and separate them from the base – that way I can store everything more easily and the players can remove the tower for easier play.

	

	

	

	

	I painted the building red, and the terrain is a textured paste in the color of “mud” with a few reddish colors added using the drybrush technique.

	

	
"
    ["content_hrv"]=>
    string(7301) "
	Ove godine, na raspored se vratila Agram Arena – međunarodno natjecanje u stolnim strateškim igrama. Ekipa je odlučila organizirati dvodnevnu kampanju za Necropolis 28. Zanimljiva je to igra u koju je jako dobro ukomponiran hobby aspekt jer pretpostavlja i izradu igraće table. Ovaj članak prati moj rad na tabli radnog naziva Red Temple of Light…

	

	Teren sam zamislio kao hram načinjen od ciglenih tornjeva, povezanih mostovima. Estetski sam htio da izgleda kao da je u procesu rušenja ili gradnje.

	

	

	

	Tornjeve sam radio od kartonskih valjaka za držanje nacrta iz narodnih novina i za role folije.

	

	

	

	

	Odluka za teksturu cigli je pala na rezanje zasebnih ciglica od XPS-a, s obzirom da bih tako mogao dobiti najrealnije spojeve između tornjeva i mostova.

	

	

	

	

	Kako mi se činilo previsoko za praktičnu uporabu u igri, odlučio sam magnetizirati tornjeve i odvojiti ih od baze – tako mogu sve lakše spremiti i igrači mogu maknuti toranj za lakšu igru.

	

	

	

	

	Obojao sam zgradu crveno, a teren je teksturirana pasta boje „blata“ sa drybrush tehnikom dodanih par crvenkastih boja.

	

	
"
    ["created"]=>
    string(19) "2026-04-01 07:55:07"
    ["modified"]=>
    string(19) "2026-04-01 07:55:07"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(3) "100"
    ["group_id"]=>
    string(1) "2"
    ["first_name"]=>
    string(5) "Mario"
    ["last_name"]=>
    string(7) "Grgurev"
    ["first_name_mask"]=>
    string(5) "mario"
    ["last_name_mask"]=>
    string(7) "grgurev"
    ["username"]=>
    string(9) "lepimario"
    ["password"]=>
    string(40) "11e0b1ecc2c467637dfa513774d2426f3b925264"
    ["born"]=>
    string(19) "2045-01-21 09:02:00"
    ["created"]=>
    string(19) "2022-01-21 09:02:32"
  }
}

Mario Grgurev, 01.04.2026.

Tabla Akropole za Necropolis28 Kampanju

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "497"
    ["member_id"]=>
    string(2) "35"
    ["title_eng"]=>
    string(41) "Acropolis Board for Necropolis28 Campaign"
    ["title_hrv"]=>
    string(39) "Tabla Akropole za Necropolis28 Kampanju"
    ["mask_eng"]=>
    string(41) "acropolis_board_for_necropolis28_campaign"
    ["mask_hrv"]=>
    string(39) "tabla_akropole_za_necropolis28_kampanju"
    ["content_eng"]=>
    string(5511) "
	This year, Agram Arena – an international tabletop strategy game competition – was back on the schedule. The team decided to organize a two-day campaign for Necropolis 28. It is an interesting game that has a very good hobby aspect, as it also involves making a gaming board. So I decided to join in and make one. This article follows my work on the board whose working title was Acropolis…

	The first thing to do was to cut a board of good dimensions. The boards are 16’’x16’’, or 40cm x 40cm. Luckily, I had a board that width so I “only” needed to cut one cut to get the right size board. After sawing, I sanded the cut and placed the 3D printed parts of the Greek (Athena) temple and was quite happy with the layout.

	  

	After that, I started adding volume to the base using Styrofoam. I used 2cm and 5cm thick boards..

	  

	Then I started to cut out the shape of the terrain. In places I decided to have small cliffs, and in other parts to have a slight slope. In parallel, I placed elements (temple, pillars, cypresses) at each step to check how everything worked..

	  

	I made a frame out of 25x5mm slats, and then started filling the holes between the boards (PVA and DAS clay mortar) and adding cliffs (tree bark).

	  

	Then I added texture – I sprinkled sand of different grain sizes onto the PVA base. I sprinkled the road with the smallest grain size, while the future grassy terrain received two or, in some places, three grain sizes..

	  

	When everything was dry, I sprayed everything black and then white and started painting with the primary colors.

	  

	Then I drew out the highlights in lighter shades and added details like ivy on the columns and patina on the bronze statues..

	  

	The next step was to add vegetation. I used two types of static grass, as well as tufts and shrubs. Finally, I planted cypress trees in the avenue..

	  

	The last detail was the addition of Charybdis, or rather its tentacles, which were also 3D printed.

	  

	The last step was to add the resin. I used Gedeo Crystal Resin tinted with blue Pebeo Vitrail, while the waves were made of water gel. That completed the board!

	  
"
    ["content_hrv"]=>
    string(5569) "
	Ove godine, na raspored se vratila Agram Arena – međunarodno natjecanje u stolnim strateškim igrama. Ekipa je odlučila organizirati dvodnevnu kampanju za Necropolis 28. Zanimljiva je to igra u koju je jako dobro ukomponiran hobby aspekt jer pretpostavlja i izradu igraće table. Stoga sam se odlučio pridružiti i izraditi jednu tablu. Ovaj članak prati moj rad na tabli radnog naziva Akropola…

	Prvo što je valjalo napraviti je bilo izrezati ploču dobrih dimenzija. Table su 16’’x16’’, odnosno 40cm x 40cm. Srećom, imao sam dasku te širine pa sam “samo” trebao izrezati jedan rez da bih dobio tablu prave veličine. Nakon piljenja, pobrusio sam rez i postavio 3D printane dijelove grčkog (Ateninog) hrama i bio podosta zadovoljan rasporedom.

	  

	Nakon toga, od stirodura sam krenuo dodavati volumen na bazu. Koristio sam 2cm i 5cm debele ploče.

	  

	Zatim sam krenuo izrezivati oblik terena. Na mjestima sam odlučio imati male litice, a drugi dio pak da bude lagana kosina. Paralelno sam i svakom koraku postavljao elemente (hram, stupove, čemprese) da provjerim kako sve funkcionira.

	  

	Od letvica 25x5mm sam napravio okvir, a potom krenuo popunjavati rupe između ploča (PVA i DAS glinamol) te dodavati litice (kora od drveta).

	  

	Potom sam dodao teksturu – na PVA podlogu sam posipao pjesak različite granulacije. Put sam posipao najmanjom granulacijom, dok je budući travnati teren dobio dvije ili mjestimično tri granulacije.

	  

	Kada se sve osušilo, posprejao sam sve u crno pa zatim u bijelo te krenuo bojati osnovnim bojama.

	  

	Zatim sam izvukao hajlajte svjetlijim nijansama te dodao detalje poput bršljana po stupovima i patine na brončanim kipovima.

	  

	Sljedeći korak bilo je dodavanje vegetacije. Koristio sam dvije vrste statičke trave te tuftove i grmlje. Za kraj posadio sam i čemprese u drvored.

	  

	Zadnji detalj bilo je dodavanje Haribde, odnosno njenih krakova koji su također bili 3D print.

	  

	Posljednji korak bilo je dodavanje rezina. Koristio sam Gedeo Crystal Resin obojan u plavu Pebeo Vitrail boju, dok su valovi izrađeni od water gela. Time je završena izrada table!

	  

	 
"
    ["created"]=>
    string(19) "2026-03-19 09:17:07"
    ["modified"]=>
    string(19) "2026-03-19 09:17:07"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "35"
    ["group_id"]=>
    string(1) "1"
    ["first_name"]=>
    string(5) "Marko"
    ["last_name"]=>
    string(9) "Paunović"
    ["first_name_mask"]=>
    string(5) "marko"
    ["last_name_mask"]=>
    string(8) "paunovic"
    ["username"]=>
    string(5) "marko"
    ["password"]=>
    string(40) "3bd37b326d19d1880d3b93a4b32e8fb3a90fa122"
    ["born"]=>
    string(19) "2033-03-07 20:35:00"
    ["created"]=>
    string(19) "2009-06-02 20:37:03"
  }
}

Marko Paunović, 19.03.2026.

Udruga minijaturista, maketara i igrača stolnih strateških igara "Agram"

Freehand Proces za Sons of Horus Spartana

Najnoviji članci

Najnoviji izvještaji s bojišta