Martin Vrkljan

Status u udruzi: Član

Od aktualnih igara u udruzi Martin igra "GW - Warhammer 40.000", "GW - Warhammer Fantasy Battles" i "GW - Gospodar prstenova", a kolekcija vojski sastoji mu se od "Eldar (GW - Warhammer 40.000)", "Kraljevstvo vilenjaka (GW - Gospodar prstenova)" i "Skaven (GW - Warhammer Fantasy Battles)".

Najnoviji članci

• Bušenje cijevi na oružjima Warhammer 40000 minijatura

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "264"
      ["member_id"]=>
      string(2) "46"
      ["title_eng"]=>
      string(37) "Drilling the guns on Wh40k miniatures"
      ["title_hrv"]=>
      string(55) "Bušenje cijevi na oružjima Warhammer 40000 minijatura"
      ["mask_eng"]=>
      string(37) "drilling_the_guns_on_wh40k_miniatures"
      ["mask_hrv"]=>
      string(53) "busenje_cijevi_na_oruzjima_warhammer_40000_minijatura"
      ["content_eng"]=>
      string(1732) "
  
  	In today's article I will bring you closer to my way of drilling guns on Warhammer 40000 Ork Nob.
  
  	In the first picture we see the necessary tools, keep in mind that the WOWSTICK battery drill is not necessary, and a manual mini drill (pin vice) can also be used, the important thing is that you have 3-4 drill bits of 0.8-2mm thickness available or a little more, depending on the desired width of the hole at the end of the procedure.
  
  	  
  
  	First, let's make an initial, or pilot, hole on the miniature, this hole serves us so that the drill bit and further drilling remain in the same place, i.e. centered.
  
  	  
  
  	Then we continue to drill with gradually wider drill bits, until we reach the desired diameter of the hole:
  
  	  
  
  	In the event that further drilling goes out of the center, and given that this procedure is applicable to plastic and resin miniatures, feel free to use the drill bit as a router, for the purpose of re-centering and widening the hole.
  "
      ["content_hrv"]=>
      string(1742) "
  
  	U današnjem članku ću vam približiti moj način bušenja cijevi na Warhammer 40000 Ork Nobu.
  
  	Na prvoj slici vidimo potrebne alate, imajte na umu da baterijska bušilica WOWSTICK nije nužna, te ručna mini bušilica (pin vice) može isto tako poslužiti, ono što je bitno jest da imate na raspolaganju 3-4 svrdla od 0.8-2mm debljine ili malo više, ovisno o željenoj širini rupe na kraju postupka.
  
  	  
  
  	Prvo krenemo na minijaturi napraviti početnu, odnosno pilot rupu, ova rupa nam služi kako bi svrdlo i daljnje bušenje ostali na istom mjestu, tj. centrirani.
  
  	  
  
  	Zatim nastavljamo bušiti sa postepeno širim svrdlima, sve dok ne postignemo željeni promjer rupe:
  
  	  
  
  	U slučaju da daljnje bušenje izađe iz centra te obzirom da je ovakav postupak primjenjiv na plastičnim i rezinskim minijaturama, slobodno koristite svrdlo kao glodalicu, u svrhu ponovnog centriranja i proširivanja rupe.
  "
      ["created"]=>
      string(19) "2022-08-11 07:15:32"
      ["modified"]=>
      string(19) "2022-08-11 07:15:32"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(2) "46"
      ["group_id"]=>
      string(1) "2"
      ["first_name"]=>
      string(5) "Goran"
      ["last_name"]=>
      string(7) "Krunić"
      ["first_name_mask"]=>
      string(5) "goran"
      ["last_name_mask"]=>
      string(6) "krunic"
      ["username"]=>
      string(6) "GoranK"
      ["password"]=>
      string(40) "bd911c73eb78686e59996538590c37e24ced47f6"
      ["born"]=>
      string(19) "2012-06-05 22:39:00"
      ["created"]=>
      string(19) "2012-06-05 22:40:18"
    }
  }
          

  Goran Krunić, 11.08.2022.
• Domagojev Top Tip

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "263"
      ["member_id"]=>
      string(2) "56"
      ["title_eng"]=>
      string(19) "Domagoj’s Top Tip"
      ["title_hrv"]=>
      string(17) "Domagojev Top Tip"
      ["mask_eng"]=>
      string(16) "domagojs_top_tip"
      ["mask_hrv"]=>
      string(17) "domagojev_top_tip"
      ["content_eng"]=>
      string(1767) "
  
  	Sometimes I get particularly lazy and don't pay attention when magnetizing or stacking miniatures. Whoever admits, half is added to him, and then the distance between the parts of the figure is visible to me from a kilometer away.
  
  	  
  
  	Horror, fear, cringe, end.
  
  	  
  
  	But the Omnissiah has a solution for this predicament too! Zelenstvarčica, greenstuff, is otherwise an excellent epoxy resin for filling such gaps. I didn't use GS as filler this time, because then it wouldn't have the benefit of the magnet - I want to still be able to swap weapons on the model. I used Greenstuff to model purity seals, which I used to hide the gap so that it would not be too obvious.
  
  	  
  
  	As St. Maverick would say, finished, not perfect.
  
  	  
  "
      ["content_hrv"]=>
      string(1670) "
  
  	Nekad bivam posebno lijen i ne pazim prilikom magnetiziranja ili slaganja minijatura. Tko prizna pola mu se doda, i onda mi razmak između djelova figure bude vidljiv s kilometra udaljenosti.
  
  	  
  
  	Horror, strah, užas, kraj.
  
  	  
  
  	Ali Omnissiah ima riješenje i za ovu nedaću! Zelenstvarčica, greenstuff, je inače odlična epoxy smola za fillanje ovakvih razmaka. Ovaj put nisam GS koristio kao filler, jer onda ne bi imao korist od magneta - želim i dalje izmjenjivati oružja na modelu. Greenstuffom sam modelirao purity sealove kojima sam sakrio razmak da ne bude preočit.
  
  	  
  
  	Kako bi rekao sveti Maverik, finished, not perfect.
  
  	  
  "
      ["created"]=>
      string(19) "2022-08-09 09:09:18"
      ["modified"]=>
      string(19) "2022-08-09 09:09:18"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(2) "56"
      ["group_id"]=>
      string(1) "2"
      ["first_name"]=>
      string(7) "Domagoj"
      ["last_name"]=>
      string(5) "Krpan"
      ["first_name_mask"]=>
      string(7) "domagoj"
      ["last_name_mask"]=>
      string(5) "krpan"
      ["username"]=>
      string(7) "Domagoj"
      ["password"]=>
      string(40) "fbad52c567fc2f837e1625e28f8b6c4aaa707d8a"
      ["born"]=>
      string(19) "2035-05-07 22:33:00"
      ["created"]=>
      string(19) "2014-05-07 22:33:57"
    }
  }
          

  Domagoj Krpan, 09.08.2022.
• Danijelovo bojanje Chaos Space Marine Lord-a - 3. dio

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "262"
      ["member_id"]=>
      string(2) "46"
      ["title_eng"]=>
      string(62) "Danijel’s paintjob on his Chaos Space Marine Lord – Part 3"
      ["title_hrv"]=>
      string(53) "Danijelovo bojanje Chaos Space Marine Lord-a - 3. dio"
      ["mask_eng"]=>
      string(55) "danijels_paintjob_on_his_chaos_space_marine_lord_part_3"
      ["mask_hrv"]=>
      string(52) "danijelovo_bojanje_chaos_space_marine_lord-a_-_3_dio"
      ["content_eng"]=>
      string(2868) "
  
  	Like the previous two times, we started the last part of this tutorial by shaking the paint on a vortex mixer (colloquially called a jerkmeister).
  
  	  
  
  	This time we went through the topics of highlighting and layering. Basically, these are the same thing, because they are based on highlighting the more protruding parts of the miniature with gradually lighter colors in a smaller and smaller area, so that certain details of the figure attract attention.
  
  	  
  
  	It is not out of place to mention here, as this was Daniel's third painting lesson, that he had already mastered the strengthening of the hand, as well as the use of the stand for painting the figure.
  
  	  
  
  	With the colors Basic Flesh, Golden Skin and Light skin, he highlighted the bumps on the face.
  
  	  
  
  	He highlighted the golden metal parts with Viking Gold paint, although the lines are not thin enough, the author of these lines believes that he managed well, considering that it was the first time he did something like this, which counts as fine motor skills.
  
  	Then he highlighted the metal details on the chains, paws and weapons with Heavy Metal paint.
  
  	Finally, he used Deep Red and Antares Red to highlight the folds on the back of the cloak.
  
  	  
  
  	All in all, an interesting experience for me as a teacher, as well as for Danijela as a student. He was definitely interested in painting miniatures, however, due to the lack of space and time to pursue this hobby, that interest will wait for better days.
  
  	In the hope that better days will come as soon as possible, I want to thank him for his teaching and patience, as well as for his time.
  "
      ["content_hrv"]=>
      string(2751) "
  
  	Kao i prethodna dva puta, posljednji dio ovog instruiranja smo započeli protresanjem boje na vrtložnoj mješalici (kolokvijalno zvani drkmeister).
  
  	  
  
  	Ovaj puta smo prolazili kroz teme highlighting-a i layering-a. U osnovi su ovo iste stvari, jer se zasnivaju na isticanju izbočenijih dijelova minijature postepeno svjetlijim bojama na sve manjem području, kako bi pojedini detalji figure privukli pažnju.
  
  	  
  
  	Ovdje nije zgorega spomenuti, kako je Danijelu ovo bio treći sat bojanja, da je već dobro ovladao učvršćivanjem ruke, kao i korištenjem stalka za bojanje figure.
  
  	  
  
  	Bojama Basic Flesh, Golden Skin i Light skin je istaknuo izbočine na licu.
  
  	  
  
  	Zlatno metalne dijelove je istaknuo bojom Viking Gold, iako linije nisu dovoljno tanke, autor ovih redaka smatra da se dobro snašao, obzirom da je prvi puta ovakvo nešto radio što se ubraja u finu motoriku.
  
  	Zatim je bojom Heavy Metal istaknuo metalne detalje na lancima, šapi i oružju.
  
  	Naposljetku je na stražnjoj strani plašta bojama Deep Red i Antares Red istaknuo nabore.
  
  	  
  
  	Sve u svemu, interesantno iskustvo i za mene kao učitelja, kao i za Danijela kao učenika. Definitivno ga je zainteresiralo bojanje minijatura, međutim, zbog nedostatka prostora i vremena za bavljenje ovim hobijem će taj interes pričekati neke bolje dane.
  
  	U nadi da ti bolji dani što prije dođu, želim mu se zahvaliti na učenju i pokazanom strpljenju, kao i odvojenom vremenu.
  "
      ["created"]=>
      string(19) "2022-07-23 10:19:15"
      ["modified"]=>
      string(19) "2022-07-23 10:19:15"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(2) "46"
      ["group_id"]=>
      string(1) "2"
      ["first_name"]=>
      string(5) "Goran"
      ["last_name"]=>
      string(7) "Krunić"
      ["first_name_mask"]=>
      string(5) "goran"
      ["last_name_mask"]=>
      string(6) "krunic"
      ["username"]=>
      string(6) "GoranK"
      ["password"]=>
      string(40) "bd911c73eb78686e59996538590c37e24ced47f6"
      ["born"]=>
      string(19) "2012-06-05 22:39:00"
      ["created"]=>
      string(19) "2012-06-05 22:40:18"
    }
  }
          

  Goran Krunić, 23.07.2022.
• Daliborov TOP TIP

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "261"
      ["member_id"]=>
      string(2) "95"
      ["title_eng"]=>
      string(17) "Dalibor's TOP TIP"
      ["title_hrv"]=>
      string(17) "Daliborov TOP TIP"
      ["mask_eng"]=>
      string(16) "dalibors_top_tip"
      ["mask_hrv"]=>
      string(17) "daliborov_top_tip"
      ["content_eng"]=>
      string(995) "
  
  	I fixed five Space Marines on a wooden slat of approx. 40 cm length with patafix (six could have gone without any problems). In this way, I was able to apply the black spray primer to several figures at the same time and thus significantly speed up the preparation for painting.
  
  	  
  
  	Top Tip Plus: When you pick up bakery products yourself in supermarkets, don't throw plastic gloves in the trash! Use them to protect your hands when spraying the primer on the figures.
  
  	  
  "
      ["content_hrv"]=>
      string(967) "
  
  	Na drvenu letvicu duljine cca 40cm patafiksom sam učvrstio pet Space Marinaca (moglo je ići i šest bez problema). Na taj način sam mogao nanositi crni prajmer u spreju istovremeno na više figura i time osjetno ubrzao pripremu za bojanje.
  
  	  
  
  	Top Tip Plus: Kada u supermarketima sami uzimate pekarske proizvode ne bacajte plastične rukavice u smeće! Iskoristite ih za zaštitu ruku prilikom sprejanja prajmera na figure.
  
  	  
  "
      ["created"]=>
      string(19) "2022-07-22 15:53:59"
      ["modified"]=>
      string(19) "2022-07-22 15:53:59"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(2) "95"
      ["group_id"]=>
      string(1) "2"
      ["first_name"]=>
      string(7) "Dalibor"
      ["last_name"]=>
      string(7) "Čavić"
      ["first_name_mask"]=>
      string(7) "dalibor"
      ["last_name_mask"]=>
      string(5) "cavic"
      ["username"]=>
      string(6) "Tvrtko"
      ["password"]=>
      string(0) ""
      ["born"]=>
      string(19) "2019-04-04 18:51:00"
      ["created"]=>
      string(19) "2019-04-04 18:51:50"
    }
  }
          

  Dalibor Čavić, 22.07.2022.
• Ulijevanje rezina u modularno korito rijeke

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "260"
      ["member_id"]=>
      string(2) "35"
      ["title_eng"]=>
      string(52) "How to pour in the resin inside a modular river bed?"
      ["title_hrv"]=>
      string(43) "Ulijevanje rezina u modularno korito rijeke"
      ["mask_eng"]=>
      string(51) "how_to_pour_in_the_resin_inside_a_modular_river_bed"
      ["mask_hrv"]=>
      string(43) "ulijevanje_rezina_u_modularno_korito_rijeke"
      ["content_eng"]=>
      string(548) "
  
  	For this summer, we have prepared for you a series of excerpts from our handbook on creating terrain called Making Tabletop Terrain for Beginners, authored by Marko Paunović (Croatian text only).
  
  	
  
  	If these clips interest you in obtaining the manual, contact us at ums.agram@gmail.com.
  "
      ["content_hrv"]=>
      string(533) "
  
  	Za ovo ljeto smo vam pripremili niz isječaka iz našeg priručnika o izradi terena pod nazivom Izrada prostornih maketa za početnike, autora Marka Paunovića.
  
  	
  
  	Ukoliko vas ovi isječci zainteresiraju za nabavkom priručnika, javite nam se na ums.agram@gmail.com.
  "
      ["created"]=>
      string(19) "2022-07-15 13:53:44"
      ["modified"]=>
      string(19) "2022-07-15 13:53:44"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(2) "35"
      ["group_id"]=>
      string(1) "1"
      ["first_name"]=>
      string(5) "Marko"
      ["last_name"]=>
      string(9) "Paunović"
      ["first_name_mask"]=>
      string(5) "marko"
      ["last_name_mask"]=>
      string(8) "paunovic"
      ["username"]=>
      string(5) "marko"
      ["password"]=>
      string(40) "3bd37b326d19d1880d3b93a4b32e8fb3a90fa122"
      ["born"]=>
      string(19) "2033-03-07 20:35:00"
      ["created"]=>
      string(19) "2009-06-02 20:37:03"
    }
  }
          

  Marko Paunović, 15.07.2022.

Svi članci

Najnoviji izvještaji s bojišta

• Dark Angels protiv T'au Battlereport 22.04.2022., GW - Warhammer 40.000, Borna Pleše (Space Marines) i Kristijan Kliska (Tau Empire)
• Sisters of Battle protiv Ultramarines 17.11.2021., GW - Warhammer 40.000, i Nino Marasović (Space Marines)
• 40k Slow Grow liga jaše dalje 27.10.2021., GW - Warhammer 40.000, Borna Pleše (Space Marines) i Josip Strnad (Space Marines)

Svi izvještaji s bojišta