JSA vs Nomads Batrep

Latest articles

• Miniature Painting Workshop - Kitbashing and Converting

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "455"
      ["member_id"]=>
      string(2) "35"
      ["title_eng"]=>
      string(55) "Miniature Painting Workshop - Kitbashing and Converting"
      ["title_hrv"]=>
      string(54) "Radionica bojanja minijatura - Kitbashing i converting"
      ["mask_eng"]=>
      string(55) "miniature_painting_workshop_-_kitbashing_and_converting"
      ["mask_hrv"]=>
      string(54) "radionica_bojanja_minijatura_-_kitbashing_i_converting"
      ["content_eng"]=>
      string(3840) "
  
  	
  
  	
  
  	
  
  	
  
  	
  
  	
  
  	
  
  	
  
  	
  
  	
  
  	
  
  	
  "
      ["content_hrv"]=>
      string(5445) "
  
  	
  
  	U subotu i nedjelju, 17. i 18.5. održali smo novu vikend radionicu bojanja minijatura. Ovog puta tema je bilo konvertiranje i kitbashanje.
  
  	Radionica se provodila kroz dva dana (cijeli vikend) i bila je fokusirana na izradu dvije (do tri) vlastite minijature od raznih dijelova (više različitih minijatura) uz dodatak modeliranja dijelova uz pomoć modelarskih masa (Green Stuff). Sastojala se od dva dijela, teorijskog i praktičnog dijela. Tijekom radionice polaznici su se upoznali s alatima, materijalima i tehnikama za izvođenje jednostavnih i kompleksnih konverzija, uključujući uporabu masa za modeliranje.
  
  	
  
  	
  
  	
  
  	Teorijski dio uključuje savjete za planiranje, nabavu dijelova i smisleno sklapanje personaliziranih minijatura da bi polaznici naučili izbjeći početničke greške i podigli svoje vještine na viši nivo.
  
  	U praktičnom dijelu, uz pomoć voditelja primijenila su se stečena znanja na vlastitu konverziju.
  
  	
  
  	
  
  	
  
  	Praktični dio Radionice se odvijao na sljedeći način:
  
  	Prvo, predavač sjedi za svojim stolom te objašnjava i demonstrira pojedini korak na svojem primjerku dok polaznici slušaju, gledaju, ali i postavljaju pitanja. Potom, polaznici sjedaju za svoje stolove i primjenjuju stečeno znanje. Predavač potom kruži između polaznika i provjerava kako svakom polazniku ide. Na taj način, može se prilagoditi svakom polazniku ponaosob.
  
  	
  
  	
  
  	
  
  	U nedjelju od 16:00 svi polaznici su dobili profesionalni feedback na urađene radove od Ane Polanšćak iz Gardens of Hecate.
  
  	
  
  	
  "
      ["created"]=>
      string(19) "2025-05-18 18:27:11"
      ["modified"]=>
      string(19) "2025-05-18 18:27:11"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(2) "35"
      ["group_id"]=>
      string(1) "1"
      ["first_name"]=>
      string(5) "Marko"
      ["last_name"]=>
      string(9) "Paunović"
      ["first_name_mask"]=>
      string(5) "marko"
      ["last_name_mask"]=>
      string(8) "paunovic"
      ["username"]=>
      string(5) "marko"
      ["password"]=>
      string(40) "3bd37b326d19d1880d3b93a4b32e8fb3a90fa122"
      ["born"]=>
      string(19) "2033-03-07 20:35:00"
      ["created"]=>
      string(19) "2009-06-02 20:37:03"
    }
  }
          

  Marko Paunović, 18th May 2025
• March to Hren28 week 7

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "454"
      ["member_id"]=>
      string(2) "96"
      ["title_eng"]=>
      string(22) "March to Hren28 week 7"
      ["title_hrv"]=>
      string(24) "March to Hren28 tjedan 7"
      ["mask_eng"]=>
      string(22) "march_to_hren28_week_7"
      ["mask_hrv"]=>
      string(24) "march_to_hren28_tjedan_7"
      ["content_eng"]=>
      string(2791) "
  
  	Our team is preparing to perform at the Turnip28 tournament called H.R.E.N.28 in Slovenia in July. Ana, Mario, Domagoj, Seb and Antoni assemble their armies and paint, and we follow them on their way!
  
  	  
  
  	ANTONI: „As for my latest pair of Fodder models, one carries a flag and the other carries a nest on its shoulders. The flag is made from a thin piece of copper that is clamped around a brass rod, secured with superglue, and then bent to look like fabric in the wind.
  
  	  
  
  	The nest is made of a mixture of green stuff and milliput that I cut lines into. I put two chicken eggs from the Tamiya farm animal set inside and secured them with a drop of superglue. The other models have all sorts of new heads, from simple medieval helmets to gas cylinder caps. To make it easier to see what they are doing, most of them have candles on their caps. “
  
  	  
  
  	MARIO: „As an unexpected addition to my army, I found an old pipe in the apartment and decided to turn it into a cannon. I had the legs from some bird monsters on the sprue and they turned out great for the conversion. My other toadie (which is supposed to be for Brutes) is a small knight and I wanted to give him some creature to stand out on to compensate. I found a stork from Muller, added the head of the pterodactyl I found on the floor of the Sferakon, and redid the legs. There are more things on the bird coming soon, but I have to decide which ones.“
  
  	  
  "
      ["content_hrv"]=>
      string(2837) "
  
  	Naša ekipa se sprema za nastup na Turnip28 turniru pod nazivom H.R.E.N.28 u Sloveniji u srpnju. Ana, Mario, Domagoj, Seb i Antoni slažu svoje vojske i farbaju, a mi ih pratimo na njihovom putu! 
  
  	  
  
  	ANTONI: „Što se tiče par najnovijih Fodder modela, jedan nosi zastavicu, a drugi nosi gnijezdo na ramenima. Zastavica je napravljena od tankog komada bakra koji je kliještima stisnut oko mjedenog štapića, učvršćen superljepilom te potom savijen da izgleda kao tkanina na vjetru.
  
  	  
  
  	Gnijezdo je napravljeno od mješavine green stuffa i milliputa u koju sam urezao crte. Unutra sam ubacio dva kokošja jaja iz Tamiya seta domaćih životinja i učvrstio ih kapljicom superljepila. Ostali su modeli dobili svakakve nove glave, od običnih srednjovjekovnih kaciga do poklopaca od plinskih boca. Kako bi bolje vidjeli što rade, većina ih ima svijeće na kapama. “
  
  	  
  
  	MARIO: „Kao neočekivani dodatak mojoj vojsci, našao sam staru lulu u stanu i odlučio pretvoriti ju u top. Imao sam noge od nekih ptičjih čudovišta na sprue-u i ispale su super za konverziju. Moj drugi toadie (koji bi trebao biti za Brutes) je mali vitez i želio sam mu dati neko biće na kojem će se istaknuti za kompenzaciju. Našao sam rodu iz Mullera, dodao glavu pterodaktila kojeg sam našao na podu Sferakona i prepravio noge. Uskoro dolazi još stvari na pticu, ali se moram odlučiti koje.“
  
  	  
  "
      ["created"]=>
      string(19) "2025-05-18 18:10:57"
      ["modified"]=>
      string(19) "2025-05-18 18:10:57"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(2) "96"
      ["group_id"]=>
      string(1) "2"
      ["first_name"]=>
      string(6) "Antoni"
      ["last_name"]=>
      string(10) "Pastuović"
      ["first_name_mask"]=>
      string(6) "antoni"
      ["last_name_mask"]=>
      string(9) "pastuovic"
      ["username"]=>
      string(6) "antoni"
      ["password"]=>
      string(40) "5dfa823ee30df1936c1792d4c8348a4bcf4c64e2"
      ["born"]=>
      string(19) "2005-04-04 18:52:00"
      ["created"]=>
      string(19) "2019-04-04 18:53:09"
    }
  }
          

  Antoni Pastuović, 18th May 2025
• Scratchbuilding Star Wars Crates

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "453"
      ["member_id"]=>
      string(3) "102"
      ["title_eng"]=>
      string(32) "Scratchbuilding Star Wars Crates"
      ["title_hrv"]=>
      string(41) "Izrada kontejnera za diorame u SW setingu"
      ["mask_eng"]=>
      string(32) "scratchbuilding_star_wars_crates"
      ["mask_hrv"]=>
      string(41) "izrada_kontejnera_za_diorame_u_sw_setingu"
      ["content_eng"]=>
      string(4962) "
  
  	  
  
  	In this article I’ll explain how I scratchbuild crates for the Star Wars Universe, to use on bases or in dioramas. It’s pretty simple and fun, and the required tools and barrier to entry is really low. These are the tools and materials I have at my disposal when I start the build.
  
  	  
  
  	My materials are two polystyrene sheets of different thicknesses. I choose the 1mm and the 0.25mm for this build, as well as square tubes of polystyrene 7.9mm X 7.9mm and a ruler. These are produced by Evergreen, and are widely available in hobby stores around the world. The tools I use are plastic cement (preferably with a brush), a hobby knife and a nail file.
  
  	  
  
  	I cut off a tip of the square tube, trying to make the length as equal to the width as possible, so 7.9mm. Now I have a cube.
  
  	  
  
  	Then I cut out smaller details for panels and parts (called greeblies in Star Wars lingo) from both the thinner and the thicker polystyrene sheets. Here I cut out as many as possible, to give myself options when assembling the crates.
  
  	  
  
  	An important aesthetic detail of the Star Wars universe is notches, and so I cut notches into several of my panels, like in this illustration.
  
  	Another stylistic factor of SW is that very few things are symmetrical. So I chose to make all sides of my crates different, varying the panelling and details, using both thick and thin polystyrene for variation in depth. Here are some examples of different sides of my crates.
  
  	  
  
  	The larger crate is created only using the polystyrene sheets, and not from the square tube. So I measured and cut out five equal sides (the bottom is open) of the 1mm thick polystyrene and glued them together to form a cube. I used the thinner polystyrene to cut out and create lids for all my crates as well. Everything is glued together using plastic cement which creates a strong bond relatively fast by melting the plastics together. Because of this I now have sturdy crates that I can then use the nail file to polish and clean up - making sure all sides of the bigger crate are flush, that all crates are flat at the bottom, and file down all the hard corners of the crates into more rounded shapes.
  
  	  
  
  	I test out the placement of the crates on my base, and make sure the scale works, before I finish the base.
  
  	  
  "
      ["content_hrv"]=>
      string(4921) "
  
  	  
  
  	U ovom ću članku objasniti kako izrađujem sanduke za Star Wars svemir, za korištenje na bazama ili u dioramama. Prilično je jednostavno i zabavno, a potrebni alati i prepreka za ulazak su stvarno niski. Ovo su alati i materijali koje imam na raspolaganju kada počnem graditi.
  
  	  
  
  	Moji materijali su dvije polistirenske ploče različitih debljina. Odabrao sam 1 mm i 0,25 mm za ovu konstrukciju, kao i kvadratne cijevi od polistirena 7,9 mm X 7,9 mm i ravnalo. Njih proizvodi Evergreen i dostupni su u hobi trgovinama diljem svijeta. Alati koje koristim su plastični cement (po mogućnosti s četkom), hobi nož i turpija za nokte.
  
  	  
  
  	Odrezao sam vrh četvrtaste cijevi, pokušavajući da duljina bude što jednaka širini, dakle 7,9 mm. Sada imam kocku.
  
  	  
  
  	Zatim sam izrezao manje detalje za panele i dijelove (koji se u žargonu Ratova zvijezda nazivaju greeblies) i od tanjih i od debljih polistirenskih ploča. Ovdje sam izrezao što je više moguće, kako bih imao mogućnosti pri sastavljanju sanduka.
  
  	  
  
  	Važan estetski detalj Star Wars svemira su urezi, pa sam izrezao ureze u nekoliko svojih ploča, kao na ovoj ilustraciji.
  
  	Još jedan stilski faktor SW-a je da je vrlo malo stvari simetrično. Stoga sam odlučio napraviti različite strane svojih sanduka, mijenjajući obloge i detalje, koristeći debeli i tanki polistiren za varijacije u dubini. Evo nekoliko primjera različitih strana mojih sanduka.
  
  	  
  
  	Veći sanduk izrađen je samo od polistirenskih ploča, a ne od četvrtaste cijevi. Tako sam izmjerio i izrezao pet jednakih stranica (dno je otvoreno) polistirena debljine 1 mm i zalijepio ih da formiraju kocku. Koristio sam tanji polistiren za izrezivanje i izradu poklopaca za sve svoje sanduke. Sve je zalijepljeno plastičnim cementom koji relativno brzo stvara čvrstu vezu topljenjem plastike. Zbog toga sada imam čvrste sanduke koje zatim mogu upotrijebiti turpiju za poliranje i čišćenje - pazeći da su sve strane većeg sanduka u ravnini, da su sve sanduke ravne na dnu i isturpijam sve tvrde kutove sanduka u zaobljenije oblike.
  
  	  
  
  	Prije nego što dovršim bazu, testiram položaj sanduka na svojoj bazi i uvjeravam se da vaga radi.
  
  	  
  "
      ["created"]=>
      string(19) "2025-05-12 09:59:09"
      ["modified"]=>
      string(19) "2025-05-12 09:59:09"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(3) "102"
      ["group_id"]=>
      string(1) "2"
      ["first_name"]=>
      string(9) "Sebastian"
      ["last_name"]=>
      string(8) "Søgård"
      ["first_name_mask"]=>
      string(9) "sebastian"
      ["last_name_mask"]=>
      string(4) "sgrd"
      ["username"]=>
      string(5) "norge"
      ["password"]=>
      string(40) "4dea770e7045a97695c7dc529698e85f5dadbded"
      ["born"]=>
      string(19) "2003-01-21 09:03:00"
      ["created"]=>
      string(19) "2022-01-21 09:03:12"
    }
  }
          

  Sebastian Søgård, 12nd May 2025
• March to Hren28 week 6

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "452"
      ["member_id"]=>
      string(2) "96"
      ["title_eng"]=>
      string(22) "March to Hren28 week 6"
      ["title_hrv"]=>
      string(24) "March to Hren28 tjedan 6"
      ["mask_eng"]=>
      string(22) "march_to_hren28_week_6"
      ["mask_hrv"]=>
      string(24) "march_to_hren28_tjedan_6"
      ["content_eng"]=>
      string(3113) "
  
  	Our team is preparing to perform at the Turnip28 tournament called H.R.E.N.28 in Slovenia in July. Ana, Mario, Domagoj, Seb and Antoni assemble their armies and paint, and we follow them on their way!
  
  	  
  
  	ANTONI: „My cult, Feast of Charybdis, is based on one or two of these Scuttlers (my plan is to make only one) that jump out of the mud, i.e. deployment is anywhere on the board and they have to make a charge. Also, their melee must end so that they or the target end up out of action, so the fight repeats until someone dies. The cult now allows all units to bury and jump out from turn to turn. I want it to end up looking like a walking island that rose out of the mud, so the top next to the tower will have some vegetation, and everything else will be muddy.
  
  	  
  
  	The second unit I worked on is the blackpowder Fodder. They are the most numerous unit in Turnip (12) and rely on having as many of them as possible at all times. My idea is for them to look unmistakably like line infantry, but each one has a gimmick that sets them apart from the others, e.g. an underwater mine for a head, a barrel with a relic on its back. Since they consider the radish a sacred manifestation of "Root", their uniforms will be a pale purple, their helmets and weapons rusty.“
  
  	  
  
  	  
  
  	MARIO: „This week, I did some minor converting as well as finishing work on the Proboscis which I managed to prime as well.“
  
  	  
  "
      ["content_hrv"]=>
      string(3109) "
  
  	Naša ekipa se sprema za nastup na Turnip28 turniru pod nazivom H.R.E.N.28 u Sloveniji u srpnju. Ana, Mario, Domagoj, Seb i Antoni slažu svoje vojske i farbaju, a mi ih pratimo na njihovom putu! 
  
  	  
  
  	ANTONI: „Moj kult, Feast of Charybdis, bazira se na jednom do dva ovakva Scuttlera (moj plan je samo jednog napravit) koji iskaču iz blata, tj. deployment je bilo gdje na boardu i moraju napravit charge. Također, njihov melee mora završiti tako da oni ili meta završe out of action, znači fight se ponavlja dok netko ne pogine. Kult sada dozvoljava svim jedinicama da se iz turna u turn zakopavaju i iskaču. Želim da mi na kraju izgleda kao hodajući otočić koji se podigao iz blata, pa će vrh pored tornja imati malo vegetacije, a sve ostalo će biti blatno.“
  
  	  
  
  	Drugi unit na kojem sam radio su blackpowder Fodder. Oni su najmnogobrojnija jedinica u Turnipu (12) i oslanjaju se na to da ih je što više u svakom trenutku. Moja ideja je da nedvojbeno izgledaju kao line infantry, ali da svaki ima neki gimmick koji ga razlikuje od drugih npr. podvodna mina umjesto glave, bačva s relikvijom na leđima. S obzirom da smatraju rotkvicu svetom manifestacijom "Roota", odore će im biti blijede ljubičaste boje, kacige i oružja zahrđala.“
  
  	  
  
  	  
  
  	MARIO: „Ovaj tjedan malo sam konvertirao, ali i dovršio Proboscisa kojeg sam čak i prajmao.“
  
  	  
  "
      ["created"]=>
      string(19) "2025-05-12 09:51:35"
      ["modified"]=>
      string(19) "2025-05-12 09:51:35"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(2) "96"
      ["group_id"]=>
      string(1) "2"
      ["first_name"]=>
      string(6) "Antoni"
      ["last_name"]=>
      string(10) "Pastuović"
      ["first_name_mask"]=>
      string(6) "antoni"
      ["last_name_mask"]=>
      string(9) "pastuovic"
      ["username"]=>
      string(6) "antoni"
      ["password"]=>
      string(40) "5dfa823ee30df1936c1792d4c8348a4bcf4c64e2"
      ["born"]=>
      string(19) "2005-04-04 18:52:00"
      ["created"]=>
      string(19) "2019-04-04 18:53:09"
    }
  }
          

  Antoni Pastuović, 12nd May 2025
• We took part in: Sferakon 2025

            array(2) {
    ["Article"]=>
    array(10) {
      ["id"]=>
      string(3) "451"
      ["member_id"]=>
      string(3) "100"
      ["title_eng"]=>
      string(30) "We took part in: Sferakon 2025"
      ["title_hrv"]=>
      string(33) "Sudjelovali smo na: Sferakon 2025"
      ["mask_eng"]=>
      string(29) "we_took_part_in_sferakon_2025"
      ["mask_hrv"]=>
      string(32) "sudjelovali_smo_na_sferakon_2025"
      ["content_eng"]=>
      string(1600) "
  
  	
  
  	
  
  	
  
  	
  
  	
  "
      ["content_hrv"]=>
      string(2123) "
  
  	
  
  	UMS "Agram" je ove godine na svom štandu u subotu 10.5. organizirao interaktivne Back to Basics radionice bojanja minijatura prilagođene svim uzrastima (od 8-99). Radionice za do tri polaznika su u trajanju od sat vremena.
  
  	
  
  	Prijave nisu bile potrebne već po principu first come, first served. U pauzama između radionica, naši volonteri pokazivali su i demonstrirali razne minijaturističke tehnike.
  
  	
  
  	
  
  	
  "
      ["created"]=>
      string(19) "2025-05-12 09:42:06"
      ["modified"]=>
      string(19) "2025-05-12 09:42:06"
    }
    ["Member"]=>
    array(10) {
      ["id"]=>
      string(3) "100"
      ["group_id"]=>
      string(1) "2"
      ["first_name"]=>
      string(5) "Mario"
      ["last_name"]=>
      string(7) "Grgurev"
      ["first_name_mask"]=>
      string(5) "mario"
      ["last_name_mask"]=>
      string(7) "grgurev"
      ["username"]=>
      string(9) "lepimario"
      ["password"]=>
      string(40) "11e0b1ecc2c467637dfa513774d2426f3b925264"
      ["born"]=>
      string(19) "2003-01-21 09:02:00"
      ["created"]=>
      string(19) "2022-01-21 09:02:32"
    }
  }
          

  Mario Grgurev, 12nd May 2025

All articles

Latest battle-reports

• Kill Team - Blooded vs. Vespid Stingwings 28th February 2025, GW - Warhammer 40.000, and Antoni Pastuović (Imperial Guard)
• 22nd April 2022, GW - Warhammer 40.000, Borna Pleše (Space Marines) and Kristijan Kliska (Tau Empire)
• 17th November 2021, GW - Warhammer 40.000, and Nino Marasović (Space Marines)

All battle-reports