Making a Winter Forest
In this short article, I will follow the process of creating a winter terrain – a forest as I showed it to the participants of the demonstration workshop as part of Advent in Agram 2024. Over three sessions, I went through all the steps necessary to create a forest under the snow.
I decided to use a 5mm thick MDF board for the base.
I cut it to the desired dimensions using a jig saw.
Then I sanded the edges using a belt sander.
Then I mixed up a mud/slush mixture consisting of: PVA glue, textured crackling paint, modeling snow, glossy varnish, and clear water gel.
I applied the mixture with a brush and covered the entire base.
Since the plan was to cover the pine trees with snow, I could afford to use the cheapest pine trees I found at the hobby store (approx. 1€/piece).
After determining how many trees per base I would use, I drilled holes in the base using a model drill (in my case an electric drill, although a pin vice can be used for the same job).
I stuck the pines into the holes in the bases and glued them together with superglue.
Then I used a large paintbrush to paint the tips of the pine branches white (for a better base). Then I mixed a mixture of white paint, PVA glue, and modeling snow and used a large paintbrush to apply it to the base parts and the pine trees.
Latest articles
- Back to Basics Workshops in Medveščak Library Krunoslav Belinić, 13th October 2025
- Gaslands - Tutorial II Marko Paunović, 13th October 2025
- GASLANDS - tutorial Marko Paunović, 2nd October 2025
- UMS Agram at CK2025 Krunoslav Belinić, 2nd October 2025
- UMS Agram at Days of Technical Culture 2025 Antoni Pastuović, 23th September 2025
Latest battle-reports
- Kill Team - Blooded vs. Vespid Stingwings 28th February 2025, GW - Warhammer 40.000, and Antoni Pastuović (Imperial Guard)
- 22nd April 2022, GW - Warhammer 40.000, Borna Pleše (Space Marines) and Kristijan Kliska (Tau Empire)
- 17th November 2021, GW - Warhammer 40.000, and Nino Marasović (Space Marines)