We took part in: Sferakon 2025
Latest articles
-
Scratchbuilding Star Wars Crates
array(2) { ["Article"]=> array(10) { ["id"]=> string(3) "453" ["member_id"]=> string(3) "102" ["title_eng"]=> string(32) "Scratchbuilding Star Wars Crates" ["title_hrv"]=> string(41) "Izrada kontejnera za diorame u SW setingu" ["mask_eng"]=> string(32) "scratchbuilding_star_wars_crates" ["mask_hrv"]=> string(41) "izrada_kontejnera_za_diorame_u_sw_setingu" ["content_eng"]=> string(4962) "Sebastian Søgård, 12nd May 2025
In this article I’ll explain how I scratchbuild crates for the Star Wars Universe, to use on bases or in dioramas. It’s pretty simple and fun, and the required tools and barrier to entry is really low. These are the tools and materials I have at my disposal when I start the build.
My materials are two polystyrene sheets of different thicknesses. I choose the 1mm and the 0.25mm for this build, as well as square tubes of polystyrene 7.9mm X 7.9mm and a ruler. These are produced by Evergreen, and are widely available in hobby stores around the world. The tools I use are plastic cement (preferably with a brush), a hobby knife and a nail file.
I cut off a tip of the square tube, trying to make the length as equal to the width as possible, so 7.9mm. Now I have a cube.
Then I cut out smaller details for panels and parts (called greeblies in Star Wars lingo) from both the thinner and the thicker polystyrene sheets. Here I cut out as many as possible, to give myself options when assembling the crates.
An important aesthetic detail of the Star Wars universe is notches, and so I cut notches into several of my panels, like in this illustration.
Another stylistic factor of SW is that very few things are symmetrical. So I chose to make all sides of my crates different, varying the panelling and details, using both thick and thin polystyrene for variation in depth. Here are some examples of different sides of my crates.
The larger crate is created only using the polystyrene sheets, and not from the square tube. So I measured and cut out five equal sides (the bottom is open) of the 1mm thick polystyrene and glued them together to form a cube. I used the thinner polystyrene to cut out and create lids for all my crates as well. Everything is glued together using plastic cement which creates a strong bond relatively fast by melting the plastics together. Because of this I now have sturdy crates that I can then use the nail file to polish and clean up - making sure all sides of the bigger crate are flush, that all crates are flat at the bottom, and file down all the hard corners of the crates into more rounded shapes.
I test out the placement of the crates on my base, and make sure the scale works, before I finish the base.
" ["content_hrv"]=> string(4921) "
U ovom ću članku objasniti kako izrađujem sanduke za Star Wars svemir, za korištenje na bazama ili u dioramama. Prilično je jednostavno i zabavno, a potrebni alati i prepreka za ulazak su stvarno niski. Ovo su alati i materijali koje imam na raspolaganju kada počnem graditi.
Moji materijali su dvije polistirenske ploče različitih debljina. Odabrao sam 1 mm i 0,25 mm za ovu konstrukciju, kao i kvadratne cijevi od polistirena 7,9 mm X 7,9 mm i ravnalo. Njih proizvodi Evergreen i dostupni su u hobi trgovinama diljem svijeta. Alati koje koristim su plastični cement (po mogućnosti s četkom), hobi nož i turpija za nokte.
Odrezao sam vrh četvrtaste cijevi, pokušavajući da duljina bude što jednaka širini, dakle 7,9 mm. Sada imam kocku.
Zatim sam izrezao manje detalje za panele i dijelove (koji se u žargonu Ratova zvijezda nazivaju greeblies) i od tanjih i od debljih polistirenskih ploča. Ovdje sam izrezao što je više moguće, kako bih imao mogućnosti pri sastavljanju sanduka.
Važan estetski detalj Star Wars svemira su urezi, pa sam izrezao ureze u nekoliko svojih ploča, kao na ovoj ilustraciji.
Još jedan stilski faktor SW-a je da je vrlo malo stvari simetrično. Stoga sam odlučio napraviti različite strane svojih sanduka, mijenjajući obloge i detalje, koristeći debeli i tanki polistiren za varijacije u dubini. Evo nekoliko primjera različitih strana mojih sanduka.
Veći sanduk izrađen je samo od polistirenskih ploča, a ne od četvrtaste cijevi. Tako sam izmjerio i izrezao pet jednakih stranica (dno je otvoreno) polistirena debljine 1 mm i zalijepio ih da formiraju kocku. Koristio sam tanji polistiren za izrezivanje i izradu poklopaca za sve svoje sanduke. Sve je zalijepljeno plastičnim cementom koji relativno brzo stvara čvrstu vezu topljenjem plastike. Zbog toga sada imam čvrste sanduke koje zatim mogu upotrijebiti turpiju za poliranje i čišćenje - pazeći da su sve strane većeg sanduka u ravnini, da su sve sanduke ravne na dnu i isturpijam sve tvrde kutove sanduka u zaobljenije oblike.
Prije nego što dovršim bazu, testiram položaj sanduka na svojoj bazi i uvjeravam se da vaga radi.
" ["created"]=> string(19) "2025-05-12 09:59:09" ["modified"]=> string(19) "2025-05-12 09:59:09" } ["Member"]=> array(10) { ["id"]=> string(3) "102" ["group_id"]=> string(1) "2" ["first_name"]=> string(9) "Sebastian" ["last_name"]=> string(8) "Søgård" ["first_name_mask"]=> string(9) "sebastian" ["last_name_mask"]=> string(4) "sgrd" ["username"]=> string(5) "norge" ["password"]=> string(40) "4dea770e7045a97695c7dc529698e85f5dadbded" ["born"]=> string(19) "2003-01-21 09:03:00" ["created"]=> string(19) "2022-01-21 09:03:12" } } -
March to Hren28 week 6
array(2) { ["Article"]=> array(10) { ["id"]=> string(3) "452" ["member_id"]=> string(2) "96" ["title_eng"]=> string(22) "March to Hren28 week 6" ["title_hrv"]=> string(24) "March to Hren28 tjedan 6" ["mask_eng"]=> string(22) "march_to_hren28_week_6" ["mask_hrv"]=> string(24) "march_to_hren28_tjedan_6" ["content_eng"]=> string(3113) "Antoni Pastuović, 12nd May 2025Our team is preparing to perform at the Turnip28 tournament called H.R.E.N.28 in Slovenia in July. Ana, Mario, Domagoj, Seb and Antoni assemble their armies and paint, and we follow them on their way!
ANTONI: „My cult, Feast of Charybdis, is based on one or two of these Scuttlers (my plan is to make only one) that jump out of the mud, i.e. deployment is anywhere on the board and they have to make a charge. Also, their melee must end so that they or the target end up out of action, so the fight repeats until someone dies. The cult now allows all units to bury and jump out from turn to turn. I want it to end up looking like a walking island that rose out of the mud, so the top next to the tower will have some vegetation, and everything else will be muddy.
The second unit I worked on is the blackpowder Fodder. They are the most numerous unit in Turnip (12) and rely on having as many of them as possible at all times. My idea is for them to look unmistakably like line infantry, but each one has a gimmick that sets them apart from the others, e.g. an underwater mine for a head, a barrel with a relic on its back. Since they consider the radish a sacred manifestation of "Root", their uniforms will be a pale purple, their helmets and weapons rusty.“
MARIO: „This week, I did some minor converting as well as finishing work on the Proboscis which I managed to prime as well.“
" ["content_hrv"]=> string(3109) "
Naša ekipa se sprema za nastup na Turnip28 turniru pod nazivom H.R.E.N.28 u Sloveniji u srpnju. Ana, Mario, Domagoj, Seb i Antoni slažu svoje vojske i farbaju, a mi ih pratimo na njihovom putu!
ANTONI: „Moj kult, Feast of Charybdis, bazira se na jednom do dva ovakva Scuttlera (moj plan je samo jednog napravit) koji iskaču iz blata, tj. deployment je bilo gdje na boardu i moraju napravit charge. Također, njihov melee mora završiti tako da oni ili meta završe out of action, znači fight se ponavlja dok netko ne pogine. Kult sada dozvoljava svim jedinicama da se iz turna u turn zakopavaju i iskaču. Želim da mi na kraju izgleda kao hodajući otočić koji se podigao iz blata, pa će vrh pored tornja imati malo vegetacije, a sve ostalo će biti blatno.“
Drugi unit na kojem sam radio su blackpowder Fodder. Oni su najmnogobrojnija jedinica u Turnipu (12) i oslanjaju se na to da ih je što više u svakom trenutku. Moja ideja je da nedvojbeno izgledaju kao line infantry, ali da svaki ima neki gimmick koji ga razlikuje od drugih npr. podvodna mina umjesto glave, bačva s relikvijom na leđima. S obzirom da smatraju rotkvicu svetom manifestacijom "Roota", odore će im biti blijede ljubičaste boje, kacige i oružja zahrđala.“
MARIO: „Ovaj tjedan malo sam konvertirao, ali i dovršio Proboscisa kojeg sam čak i prajmao.“
" ["created"]=> string(19) "2025-05-12 09:51:35" ["modified"]=> string(19) "2025-05-12 09:51:35" } ["Member"]=> array(10) { ["id"]=> string(2) "96" ["group_id"]=> string(1) "2" ["first_name"]=> string(6) "Antoni" ["last_name"]=> string(10) "Pastuović" ["first_name_mask"]=> string(6) "antoni" ["last_name_mask"]=> string(9) "pastuovic" ["username"]=> string(6) "antoni" ["password"]=> string(40) "5dfa823ee30df1936c1792d4c8348a4bcf4c64e2" ["born"]=> string(19) "2005-04-04 18:52:00" ["created"]=> string(19) "2019-04-04 18:53:09" } } -
We took part in: Sferakon 2025
array(2) { ["Article"]=> array(10) { ["id"]=> string(3) "451" ["member_id"]=> string(3) "100" ["title_eng"]=> string(30) "We took part in: Sferakon 2025" ["title_hrv"]=> string(33) "Sudjelovali smo na: Sferakon 2025" ["mask_eng"]=> string(29) "we_took_part_in_sferakon_2025" ["mask_hrv"]=> string(32) "sudjelovali_smo_na_sferakon_2025" ["content_eng"]=> string(1600) "Mario Grgurev, 12nd May 2025
" ["content_hrv"]=> string(2123) "
UMS "Agram" je ove godine na svom štandu u subotu 10.5. organizirao interaktivne Back to Basics radionice bojanja minijatura prilagođene svim uzrastima (od 8-99). Radionice za do tri polaznika su u trajanju od sat vremena.
Prijave nisu bile potrebne već po principu first come, first served. U pauzama između radionica, naši volonteri pokazivali su i demonstrirali razne minijaturističke tehnike.
" ["created"]=> string(19) "2025-05-12 09:42:06" ["modified"]=> string(19) "2025-05-12 09:42:06" } ["Member"]=> array(10) { ["id"]=> string(3) "100" ["group_id"]=> string(1) "2" ["first_name"]=> string(5) "Mario" ["last_name"]=> string(7) "Grgurev" ["first_name_mask"]=> string(5) "mario" ["last_name_mask"]=> string(7) "grgurev" ["username"]=> string(9) "lepimario" ["password"]=> string(40) "11e0b1ecc2c467637dfa513774d2426f3b925264" ["born"]=> string(19) "2003-01-21 09:02:00" ["created"]=> string(19) "2022-01-21 09:02:32" } } -
We visited: Eurotrack 2025 Zagreb
array(2) { ["Article"]=> array(10) { ["id"]=> string(3) "450" ["member_id"]=> string(2) "64" ["title_eng"]=> string(33) "We visited: Eurotrack 2025 Zagreb" ["title_hrv"]=> string(36) "Posjetili smo: Eurotrack 2025 Zagreb" ["mask_eng"]=> string(32) "we_visited_eurotrack_2025_zagreb" ["mask_hrv"]=> string(35) "posjetili_smo_eurotrack_2025_zagreb" ["content_eng"]=> string(3422) "Krunoslav Belinić, 12nd May 2025On May 10 we had the pleasure of visiting the biggest model train expo in Croatia - Eurotrack 2025.
Meeting friends is always a pleasure!
And of course, enjoying the small world of trains!
" ["content_hrv"]=> string(3505) "
U petak, 10. svibnja, naša delegacija za izložbe, posjetila je najveću izložbu modela vlakova u Hrvatskoj pod nazivom Eurotrack 2025.
Naletiti na poznate njuške uvijek je gušt!
A pogotovo uživati u predivnom malom svijetu željeznice!
" ["created"]=> string(19) "2025-05-12 09:36:50" ["modified"]=> string(19) "2025-05-12 09:36:50" } ["Member"]=> array(10) { ["id"]=> string(2) "64" ["group_id"]=> string(1) "1" ["first_name"]=> string(9) "Krunoslav" ["last_name"]=> string(8) "Belinić" ["first_name_mask"]=> string(9) "krunoslav" ["last_name_mask"]=> string(7) "belinic" ["username"]=> string(5) "Kruno" ["password"]=> string(40) "eb3fda45fbec0258e90d809803b10491c548b22f" ["born"]=> string(19) "2015-01-18 09:19:00" ["created"]=> string(19) "2015-01-18 09:20:39" } } -
AGRAM LEGO SECTION - Orient Express: Fourth Lecture and finalization of the build
array(2) { ["Article"]=> array(10) { ["id"]=> string(3) "449" ["member_id"]=> string(2) "64" ["title_eng"]=> string(81) "AGRAM LEGO SECTION - Orient Express: Fourth Lecture and finalization of the build" ["title_hrv"]=> string(78) "AGRAM LEGO SEKCIJA - Orient Express četvrto predavanje i završetak izgradnje" ["mask_eng"]=> string(80) "agram_lego_section_-_orient_express_fourth_lecture_and_finalization_of_the_build" ["mask_hrv"]=> string(76) "agram_lego_sekcija_-_orient_express_cetvrto_predavanje_i_zavrsetak_izgradnje" ["content_eng"]=> string(1757) "Krunoslav Belinić, 12nd May 2025
" ["content_hrv"]=> string(3302) "
U srijedu 7.5. u sklopu naše Agram Lego Sekcije nastavili smo sa serijom predavanja paralelno sa izradom LEGO makete vlaka Orient Express!
Posljednje predavanje u ovoj seriji je počelo u 18:00 i trajalo je otprilike 45 minuta u kojem nas je naš dežurni strojar Krunoslav Belinić upoznao sa povijesti vlaka Orient Express.
Ulaz na predavanja je besplatan i otvoren za sve te prijave nisu potrebne.
Izrada makete je rezervirana za članove Agram Lego Sekcije, a za kraj smo ostavili postavljanje rasvjete u lokomotivu i vagone. Čaroban efekt!
" ["created"]=> string(19) "2025-05-12 09:24:52" ["modified"]=> string(19) "2025-05-12 09:24:52" } ["Member"]=> array(10) { ["id"]=> string(2) "64" ["group_id"]=> string(1) "1" ["first_name"]=> string(9) "Krunoslav" ["last_name"]=> string(8) "Belinić" ["first_name_mask"]=> string(9) "krunoslav" ["last_name_mask"]=> string(7) "belinic" ["username"]=> string(5) "Kruno" ["password"]=> string(40) "eb3fda45fbec0258e90d809803b10491c548b22f" ["born"]=> string(19) "2015-01-18 09:19:00" ["created"]=> string(19) "2015-01-18 09:20:39" } }
Latest battle-reports
- Kill Team - Blooded vs. Vespid Stingwings 28th February 2025, GW - Warhammer 40.000, and Antoni Pastuović (Imperial Guard)
- 22nd April 2022, GW - Warhammer 40.000, Borna Pleše (Space Marines) and Kristijan Kliska (Tau Empire)
- 17th November 2021, GW - Warhammer 40.000, and Nino Marasović (Space Marines)