UMS "Agram" : Agram Group Build #Project2 – part 5. < Articles < Hobby

Agram Group Build #Project2 – part 5.

Marko Paunović, 4th September 2025

From 2021, the Association also organizes group projects for its members in which several members participate at once. The program called Agram Group Build was created after our members discussed joint projects on Wednesdays and how it would be convenient to gather more people on Wednesdays at our Hobby corner to work on a common "something"... #Project2 presents a dieselpunk diorama of a flying island with a fast food stand and several docks for flying cars, and the wonderful art of Alejandro Burdisi serves as a template. The main effects on the diorama will be LED lighting, but also the application of the tensegrity principle.

It's been a while since the last article. In the meantime, we've done the calculations for the electricity, but also confirmed the practical calculations. We decided on 6 circuits - each of which is powered by its own Cr2032 battery at 3V. In addition, we decided to create a parallel power supply for all circuits via a single transformer from 220 V AC to 3 V DC. The switch will determine which power supply is used. In theory, it sounds feasible, but it needs to be tested.

According to the sketch, the most loaded circuit is the one from the flying car, which has as many as 9 LEDs in it. Therefore, we put together a circuit with all nine LEDs on the test board - four blue, two white, two red and one green and connected everything to one Cr 2032 battery.

Everything worked so we decided to let them burn overnight. All the LEDs burned for about 10 hours. Which is satisfactory for group performances – because they will certainly burn for the duration of the performance. And for the exhibition, it will still be necessary to connect the diorama to a 220 V transformer.

Latest articles

Back to Basics Workshops in Medveščak Library

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "476"
    ["member_id"]=>
    string(2) "64"
    ["title_eng"]=>
    string(47) "Back to Basics Workshops in Medveščak Library"
    ["title_hrv"]=>
    string(68) "Back to Basics radionice bojanja minijatura u Knjižnici Medveščak"
    ["mask_eng"]=>
    string(45) "back_to_basics_workshops_in_medvescak_library"
    ["mask_hrv"]=>
    string(65) "back_to_basics_radionice_bojanja_minijatura_u_knjiznici_medvescak"
    ["content_eng"]=>
    string(5094) "
	

	During October and November, we held our Back to Basics miniature painting workshops for the youngest at the Zagreb City Libraries.

	

	

	The first set of three workshops was held in the Youth Department of the Medveščak Library on October 2, 9 and 11, 2025.

	

	

	During the workshops, our youngest participants painted chibi figures from the UMS Agram line and made a castle from upcycled materials.

	

	

	

	

	

	

	

	

	More photos can be found on our social media.

	
"
    ["content_hrv"]=>
    string(5118) "
	

	Tijekom listopada i studenog u Knjižnicama Grada Zagreba smo održali naše Back to Basics radionice bojanja minijatura za najmlađe. 

	

	

	Prvi set od tri radionice održan je u Odjelu za mlade Knjižnice Medveščak 2., 9. i 11.10.2025. 

	

	

	Tijekom radionica naši najmlađi polaznici su bojali chibi figure iz linije UMS Agram te izrađivali dvorac od upcycle materijala.

	

	

	

	

	

	

	

	

	Više fotografija potražite na našim socijalnim mrežama!

	
"
    ["created"]=>
    string(19) "2025-10-13 09:20:17"
    ["modified"]=>
    string(19) "2025-10-13 09:20:17"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "64"
    ["group_id"]=>
    string(1) "1"
    ["first_name"]=>
    string(9) "Krunoslav"
    ["last_name"]=>
    string(8) "Belinić"
    ["first_name_mask"]=>
    string(9) "krunoslav"
    ["last_name_mask"]=>
    string(7) "belinic"
    ["username"]=>
    string(5) "Kruno"
    ["password"]=>
    string(40) "eb3fda45fbec0258e90d809803b10491c548b22f"
    ["born"]=>
    string(19) "2015-01-18 09:19:00"
    ["created"]=>
    string(19) "2015-01-18 09:20:39"
  }
}

Krunoslav Belinić, 13th October 2025

Gaslands - Tutorial II

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "475"
    ["member_id"]=>
    string(2) "35"
    ["title_eng"]=>
    string(22) "Gaslands - Tutorial II"
    ["title_hrv"]=>
    string(37) "Gaslands - bojanje autića - nastavak"
    ["mask_eng"]=>
    string(22) "gaslands_-_tutorial_ii"
    ["mask_hrv"]=>
    string(36) "gaslands_-_bojanje_autica_-_nastavak"
    ["content_eng"]=>
    string(5350) "
	

	In this article I will briefly describe how I painted another set of three cars for Gaslands. Same as last time, I started with a black undercoat.

	

	As I decided to keep the colour of the vehicles matt black, I left it at that and proceeded to paint the windshields. Using much the same method I used for the yellow crew, I applied the chosen paint scheme. Unlike blue windshields with the yellow crew, here I decided to use the yellow/red combo.

	

	I then added chrome.

	

	In the end, I added metallic details such as guns etc.

	

	It was time to add the decals. I first painted all the surfaces with gloss varnish. Then I added the decals and after they set properly, I covered everything with Ultra Matt Varnish..

	

	And thus ended the painting process.

	

	GALLERY OF THE TWO FINISHED CREWS

	

	

	

	

	

	

	
"
    ["content_hrv"]=>
    string(5419) "
	

	U ovom ću  članku opisati kako sam obojao drugi set od tri autića za Gaslands demo partije. Kao i prošli puta, krenuo sam s crnim undercoatom. 

	

	S obzirom da sam odlučio da ovaj crew bude mat crn, farbanje karoserija sam tu prekinuo i počeo sam sa staklima. Slično kao i prošli put, koristio sam sličnu shemu, ali u drugim bojama. Za razliku od plavih refleksija na žutim autima, na crnima sam se odlučio za žuto/crvenu kombinaciju. 

	

	Dodao sam krom.

	

	I na kraju dodao metalne dijelove poput oružja.

	

	Na ovim autima, odlučio sam dodati i naljepnice. Prvo sam na površine s naljepnicama stavio gloss lak. Potom sam postavio naljepnicce i nakon što su se dobro osušile sam te iste površine prekrio mat lakom. 

	

	Time sam završio posao...

	

	GALERIJA ZAVRŠENIH RADOVA!

	

	

	

	

	

	

	
"
    ["created"]=>
    string(19) "2025-10-13 07:21:57"
    ["modified"]=>
    string(19) "2025-10-13 07:21:57"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "35"
    ["group_id"]=>
    string(1) "1"
    ["first_name"]=>
    string(5) "Marko"
    ["last_name"]=>
    string(9) "Paunović"
    ["first_name_mask"]=>
    string(5) "marko"
    ["last_name_mask"]=>
    string(8) "paunovic"
    ["username"]=>
    string(5) "marko"
    ["password"]=>
    string(40) "3bd37b326d19d1880d3b93a4b32e8fb3a90fa122"
    ["born"]=>
    string(19) "2033-03-07 20:35:00"
    ["created"]=>
    string(19) "2009-06-02 20:37:03"
  }
}

Marko Paunović, 13th October 2025

GASLANDS - tutorial

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "474"
    ["member_id"]=>
    string(2) "35"
    ["title_eng"]=>
    string(19) "GASLANDS - tutorial"
    ["title_hrv"]=>
    string(43) "GASLANDS - bojanje autića za postapoc igru"
    ["mask_eng"]=>
    string(19) "gaslands_-_tutorial"
    ["mask_hrv"]=>
    string(42) "gaslands_-_bojanje_autica_za_postapoc_igru"
    ["content_eng"]=>
    string(2790) "
	

	In this article I will briefly describe how I painted a set of three cars for Gaslands. I started with a black undercoat and then applied a silver (Leadbelcher) spray as the base color.

	

	Then I used the Rust effect from Dirty Down. Once the effect was dry, I sprayed the cars with a clear matte varnish to protect the layer of rust (which is activated when exposed to moisture). After the spray dried, I applied the Scratches and Heavy Chipping effect from Ammo by Mig Jimenez with a brush. After about fifteen minutes of drying, I sprayed the cars in yellow and let it dry for about 15 minutes. I used a brush to apply water over the cars and used a stiff brush, wooden skewer and cotton swab to remove the excess paint that was activated due to the Scratches and Heavy Chipping effects.

	

	Then came the painting. First I covered all the details that would not be yellow in black. Then I used blue to draw out the reflections on the glass. Added the metal details (engines and weapons). And finally added the chrome effects (using GSW paint). For the very end I left the engine shine effects.

	

	The painting of the cars for Gaslands is now complete.

	
"
    ["content_hrv"]=>
    string(2794) "
	

	U ovom članku ću ukratko opisati kako sam bojao set od tri autića za Gaslands. Krenuo sam sa crnim undercoatom na kojeg sam stavio srebrni (Leadbelcher) sprej kao osnovnu boju.

	

	Potom sam koristio Rust efekt od tvrtke Dirty Down. Kada se posušio efekt, autiće sam posprejao bezbojnim mat lakom da zaštitim sloj hrđe (koja se aktivira u doticaju sa vlagom). Nakon što se sprej osušio, kistom sam nanio Scratches i Heavy Chipping efekt od Ammo by Mig Jimenez. Nakon petnaestak minuta sušenja, autiće sam posprejao u žuto i ostavio da se osuši cca 15 minuta. Kistom sam premazao vodu preko autića i tvrdim kistom, drvenim ražnjićem i štapićem za uši sam uklonio višak boje koji se aktivirao zbog Scratches i Heavy Chipping efekata.

	

	Zatim je uslijedilo bojanje. Prvo sve detalje koji neće biti žuti sam prekrio u crnu boju. Zatim sam izvukao plavom bojom refleksije na staklima. Dodao metalne detalje (motori i oružja). I na kraju dodao krom efekte (koristeći boju tvrtke GSW). Za sami kraj ostavio sam efekte sjaja motora.

	

	TIme je završeno bojanje autića za Gaslands.

	
"
    ["created"]=>
    string(19) "2025-10-02 07:39:25"
    ["modified"]=>
    string(19) "2025-10-02 07:39:25"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "35"
    ["group_id"]=>
    string(1) "1"
    ["first_name"]=>
    string(5) "Marko"
    ["last_name"]=>
    string(9) "Paunović"
    ["first_name_mask"]=>
    string(5) "marko"
    ["last_name_mask"]=>
    string(8) "paunovic"
    ["username"]=>
    string(5) "marko"
    ["password"]=>
    string(40) "3bd37b326d19d1880d3b93a4b32e8fb3a90fa122"
    ["born"]=>
    string(19) "2033-03-07 20:35:00"
    ["created"]=>
    string(19) "2009-06-02 20:37:03"
  }
}

Marko Paunović, 2nd October 2025

UMS Agram at CK2025

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "473"
    ["member_id"]=>
    string(2) "64"
    ["title_eng"]=>
    string(19) "UMS Agram at CK2025"
    ["title_hrv"]=>
    string(42) "UMS Agram na CK2025 u Stubičkim toplicama"
    ["mask_eng"]=>
    string(19) "ums_agram_at_ck2025"
    ["mask_hrv"]=>
    string(41) "ums_agram_na_ck2025_u_stubickim_toplicama"
    ["content_eng"]=>
    string(2737) "
	

	

	

	

	

	

	

	

	For more photos check our social media!
"
    ["content_hrv"]=>
    string(2864) "
	U subotu, 27.9.2025. naši članovi su nastupili na CK2025 u Stubičkim toplicama.

	

	

	

	

	

	

	

	

	Za više fotografija posjetite naše socijalne mreže!
"
    ["created"]=>
    string(19) "2025-10-02 07:28:26"
    ["modified"]=>
    string(19) "2025-10-02 07:28:26"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "64"
    ["group_id"]=>
    string(1) "1"
    ["first_name"]=>
    string(9) "Krunoslav"
    ["last_name"]=>
    string(8) "Belinić"
    ["first_name_mask"]=>
    string(9) "krunoslav"
    ["last_name_mask"]=>
    string(7) "belinic"
    ["username"]=>
    string(5) "Kruno"
    ["password"]=>
    string(40) "eb3fda45fbec0258e90d809803b10491c548b22f"
    ["born"]=>
    string(19) "2015-01-18 09:19:00"
    ["created"]=>
    string(19) "2015-01-18 09:20:39"
  }
}

Krunoslav Belinić, 2nd October 2025

UMS Agram at Days of Technical Culture 2025

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "472"
    ["member_id"]=>
    string(2) "96"
    ["title_eng"]=>
    string(43) "UMS Agram at Days of Technical Culture 2025"
    ["title_hrv"]=>
    string(41) "UMS Agram na 14. danima tehničke kulture"
    ["mask_eng"]=>
    string(43) "ums_agram_at_days_of_technical_culture_2025"
    ["mask_hrv"]=>
    string(39) "ums_agram_na_14_danima_tehnicke_kulture"
    ["content_eng"]=>
    string(6577) "
	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	For more photos check our social media!
"
    ["content_hrv"]=>
    string(7407) "
	19. i 20.9. nastupili smo na XIV danima tehničke kulture u Kulturnom centru Dubrava. Dani je organizirala Zagrebačka zajednica tehničke kulture.

	

	

	Na Dane smo došli sa izložbenim prostorom i prostorom za radionice.

	

	

	

	

	

	U sklopu nastupa organizirali smo:

	- predstavljanje Agramera, linije chibi minijatura 

	

	

	- promociju knjige Tabletop Scenery for Beginners 

	

	A s ponosom objavljujemo i da smo za naš rad u 2024. primili godišnju nagradu tehničke kulture dr. Oton Kučera

	

	

	

	Također smo organizirali i besplatne:

	- pokazne demonstracije minijaturističkih tehnika - sculpting i bojanje minijatura u petak 

	

	

	

	

	

	- Back to Basics radionice bojanja minijatura za najmlađe u subotu

	

	

	Za više fotografija posjetite naše socijalne mreže!
"
    ["created"]=>
    string(19) "2025-09-23 08:18:45"
    ["modified"]=>
    string(19) "2025-09-23 08:20:36"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "96"
    ["group_id"]=>
    string(1) "2"
    ["first_name"]=>
    string(6) "Antoni"
    ["last_name"]=>
    string(10) "Pastuović"
    ["first_name_mask"]=>
    string(6) "antoni"
    ["last_name_mask"]=>
    string(9) "pastuovic"
    ["username"]=>
    string(6) "antoni"
    ["password"]=>
    string(40) "5dfa823ee30df1936c1792d4c8348a4bcf4c64e2"
    ["born"]=>
    string(19) "2005-04-04 18:52:00"
    ["created"]=>
    string(19) "2019-04-04 18:53:09"
  }
}